XPS 8390 NVMe SSD Install issue
Here is how to change from RAID to AHCI without reinstalling everything.
1. run Command Prompt (Admin)
2.Enter this command: bcdedit /set {current} safeboot minimal
3.Restart the computer and enter BIOS Setup (pressing F2 during boot)
4.Change the SATA Operation mode to AHCI from RAID
5.Save changes and exit Setup. Windows will automatically boot to Safe Mode
6.Right-click the Windows Start Menu once more. Choose Command Prompt (Admin)
7.Enter this command: bcdedit /deletevalue {current} safeboot
8.Reboot again and Windows will automatically start with AHCI drivers enabled
Post Views: 7